Valtra T Series Tractors


If you could design and build a tractor, this is what it would look like. Many of the new T Series’ unique features originated from our customers because this tractor is the end result of discussions with hundreds of customers and thousands of hours of test driving.



To ensure unrivalled reliability, we make all four major components of the Valtra T Series in-house. The chassis, transmission and cab are Valtra’s own design and engineering, and AGCO Power is the original Valtra engine that sets the reliability standard in our industry. The T Series is built for working in tough conditions – every day.

Play Video


Ease of use

We made owning, operating and servicing your tractor easy so that you can concentrate on your work. The controls in the cab are located to minimise body movement, transmission operation is easy with a new drive lever, and the bright work lights let you keep working when night falls. We paid extra attention to the daily maintenance points, so that checking the oil and cleaning the filters take as little time as possible. The T Series is well suited for your work because many of its unique features were actually innovated by our customers.

The cab is your comfort zone

You notice the comfort as soon as you enter the cab – three steps and safe access through the wide-opening and softclosing door. You have fingertip control of the new 5-speed powershift or Direct CVT, with a drive lever for driving and a joystick for controlling all tractor hydraulics. The cab has four seat options, from mechanical suspension to the Valtra Evolution seat with air conditioning and air suspension. Your co-driver also enjoys comfort and plenty of space. Two cab suspensions are available: luxury, semi-active pneumatic AutoComfort and a new mechanical suspension. The T Series has a front axle with AIRES+ suspension that constantly monitors the ground and communicates with the AutoComfort cab suspension to make you feel as comfortable as possible.

Intelligent frame

With its long wheelbase, 2995 mm, the T Series gives good stability and a steady ride. This tractor also reaches a new level of agility, with a turning radius of just 5.25 m, thanks to the narrow engine construction, integrated front linkage and front PTO. At the same time, the frame structure enables us to design the bonnet in a way that improves visibility. While the T Series has a high ground clearance up to 60 cm, the cab sits lower, making this the most compact 6-cylinder on the market, and it still handles high payloads.

Heavy lifting

The T Series is excellent for maximum grip thanks to its front/rear weight distribution of 40%/60%. The front loader sub-frame is fully integrated with the frame structure. The integrated front lift gives you the highest lifting capacity on the market, 51 kN in front and up to 95 kN in the rear. The unique 890 mm lift height makes it easy to work with implements. Both a three-speed, electrically controlled PTO and a Ground Speed


We lowered the total cost of ownership by reducing fuel consumption and emissions to meet EU Stage V engine regulations, while still delivering power where you need it. At the same time we have focused on keeping maintenance to a minimum, for example with service-free hydraulic lash adjustment (HLA).

Right-sizing saves fuel

You get good responsiveness and fuel economy throughout the rpm range with the T Series’ 2000 bar injection pressure. You reach max torque at 1500 rpm. The T Series lowers fuel consumption with a new cooling package, a high pillar air intake, electronic viscous fan control, and optimised heat removal.

Valtra EcoPower

With the Valtra T174 EcoPower model you can choose between two engine settings at the flick of a switch and minimise fuel consumption, especially for transport driving. The engine torque increases and the average piston speed is reduced by 20 percent. This not only reduces engine wear; it also means fuel savings of up to 10 percent. Idle speed is only 650 rpm

The Sigma Power boost

The Sigma Power feature gives up to 36 additional horsepower for PTO work when required. Sigma Power is especially useful when you are working with implements that demand a lot of PTO power, such as chippers, mowers, and power harrows.

Market leading hydraulics

The Valtra Direct, Versu and Active models offer high-capacity load-sensing hydraulics with 115, 160 or 200 l/min hydraulic pumps. Valtra is the only tractor manufacturer that can offer the patented hydraulic assistant even for powershift models. There are separate oils for the transmission and hydraulics, up to seven service valves in the rear and three valves in front. In Active the rear valves are mechanically controlled with the ergonomically located, clearly marked levers. The front valves for the front loader, front lift or both, can be electronically controlled by a joystick on all models.


Valtra SmartTouch has raised usability to a new level. It’s more intuitive than your smartphone. Settings are easily accessible within only two taps or swipes and all technology is integrated into the new easy-to-use format: Valtra Guide, ISOBUS, Connect, Section Control and TaskDoc.



5PS, with open centre 73/90 litre hydraulics
Mechanical hydraulic controls

In HiTech and Active the transmission control is robotised, so there are no mechanical gear levers. These tractors can be equipped with easy-to-use basic controls or with a control armrest that lets you drive at all speeds using the small gear lever and cruise control.


5PS, with load sensing hydraulics
Mechanical hydraulic controls

New Joystick available in Active

Valtra Active is a revolutionary powershift technology with load sensing hydraulics at up to 200 l/minute, a hydraulic assistant and separate hydraulic and transmission oils. In HiTech and Active models the transmission control is robotized, so there are no mechanical gear levers. These tractors can be equipped with easy-to-use basic controls or with a control armrest that lets you drive at all speeds using the small gear lever and cruise control.


5PS, with load sensing hydraulics
Electrical hydraulic controls

Valtra SmartTouch armrest with display

Easy transmission and hydraulic settings

Valtra Versu is the king of the new generation powershift transmissions, with electronic hydraulic control, a hydraulic assistant, 115, 160 or 200 litre output, and separate hydraulic and transmission oils. It operates with the drive lever in automatic or manual mode. By choosing a Versu transmission, you get the ease of powershift and the flexibility of CVT in one package


CVT with load sensing hydraulics
Electrical hydraulic controls

Valtra SmartTouch armrest with display

This is the flagship of the range. The drive lever allows you to adjust the acceleration and deceleration with just your right hand. We offer versatile velocity control setups, including a manual transmission control for use with some special types of crop.




Select the horsepower, the hydraulics, and the gearbox you need. Then select the options required for your work. We build tractors that give you unmatched flexibility. This is the ideal tractor for arable farming, with power on the ground and a seamlessly working engine and transmission. For dairy and mixed farms we provide a wide range of options for mowing. This is the best solution for a contractor doing heavy front loader work, thanks to the patented hydraulic assistant. For forestry work, you can choose underside protection, the high-capacity hydraulic pump and SkyView cab with enhanced visibility. All options come factory installed and are covered by the factory warranty.


The Valtra Unlimited service creates unlimited possibilities. Get a unique exterior package with a special paint color, or choose interior features such as leather and chrome. Select business applications, like a bottom grader, or special military features. Everything is installed at the factory and covered by the factory warranty.

The sky’s no limit!



The T Series isn’t the cheapest tractor you can buy. But drive it for 10,000 hours and then you’ll see the low total cost of ownership. For a start, we build your tractor for you, so you get only the features you need, factory installed and covered by the factory warranty. With AGCO Finance you tailor your financing costs. The optimized service intervals reduce your maintenance costs and the SCR only AGCO Power engines give you the best overall fluid economy. Choose the T174 EcoPower model to save an additional 10% in fuel costs. Select Valtra Care to fix your maintenance costs and get the service contract that suits your needs. And with genuine Valtra parts and 24/7 service you will get high resale value for your tractor. Valtra has one of the fastest parts delivery services in the industry to keep your working machine running, day in, day out.

The sky’s no limit!


Valtra offers a set of smart farming technologies that work seamlessly together – Valtra Guide, ISOBUS, Section Control, Variable Rate Control and TaskDoc – which you operate from the SmartTouch terminal. By automatically guiding your tractor and implements, these improve your accuracy and precision, reduce working time, and make sure you get better yields and better return on your investment.

The sky’s no limit!

Call Now Button Scroll to Top